A seamless finish. A complete system.

About Microestil Microcement

Microestil is a professional microcement system manufactured in Spain and distributed in North America by Cadoro. It is designed to create seamless decorative surfaces with very little build thickness and can be used on walls, floors, ceilings, furniture, countertops and properly prepared renovation surfaces.

The finished appearance can range from soft and subtle to highly organic, depending on the product, grain size, application technique, sanding and sealer system.

Where Can Microcement Be Used?

Microcement can be used in residential and commercial interiors including feature walls, floors, bathrooms, showers, kitchens, fireplaces, retail spaces and furniture. Because the system can often be installed over properly prepared existing substrates, it can also be an excellent option for renovations where removing the original surface would be difficult or disruptive.

Every substrate should be evaluated before installation. Movement, moisture, contamination, cracking and surface preparation can all affect the final result.

Microcement for Bathrooms and Showers

Microcement is frequently selected for bathrooms because it creates a continuous finish without conventional grout lines. In showers and other wet areas, however, the decorative microcement should be considered part of a complete installation system.

Appropriate substrate preparation, reinforcement, waterproofing where required, primers, microcement layers and the correct protective sealer all contribute to the performance of the finished surface.

Do not rely on the decorative microcement alone as a substitute for a properly designed waterproofing system.

Microcement Floors

Microcement can create continuous floors with an organic hand-applied appearance that is very different from tile or poured concrete. Floors require careful preparation and installation because they are subjected to movement, abrasion, furniture, foot traffic and cleaning.

Reinforcement, base coats, finish coats and the final protection system should be selected according to the substrate and intended use of the space.

Texture and Finish Options

Microestil includes different base and finish materials that allow installers to control texture, movement and final appearance. Coarser materials can create stronger visual movement while finer materials can produce a softer, tighter finish.

The final look is also influenced by trowel technique, water ratio, timing, sanding and sealer selection. Because microcement is hand applied, subtle variation is part of the character of the finish.

Primers, Reinforcement and Sealers

A successful microcement installation is a system rather than a single product. Primers help prepare and regulate the substrate, fiberglass mesh can provide reinforcement where required, and the microcement layers create the decorative surface.

The protective system is selected according to the application. Walls, floors, wet areas and specialty surfaces may require different sealers or protection levels.

Maintenance

Once fully cured, microcement surfaces are generally maintained using mild, non-abrasive cleaners. Avoid harsh chemicals or aggressive scrubbing products unless specifically approved for the protective system used on the project.

Like other decorative architectural finishes, the protective coating may eventually require maintenance or renewal depending on traffic, exposure and cleaning practices.

Choosing the Right Microestil System

If you are unsure which Microestil products are required for your project, contact Cadoro before ordering. Tell us the substrate, project type, approximate square footage and whether the surface is a wall, floor, shower or other specialty application.

We can help determine the appropriate primer, base coat, finish coat, reinforcement and sealer system as well as estimate product quantities.

Frequently Asked Questions

Can Microestil be installed over existing tile?

In many renovation situations it can, provided the tile is firmly bonded and the surface is correctly prepared. Joints, movement and substrate condition must be addressed before applying the decorative system.

Can Microestil be used in a shower?

Yes, Microestil can be incorporated into properly designed shower systems. Waterproofing, substrate preparation and the correct protective sealer are critical components of the installation.

Can microcement be used on floors?

Yes. Floors require the appropriate reinforcement, base system and protective coating for the expected traffic and conditions.

Is every Microestil finish identical?

No. Microcement is hand applied. Trowel movement, texture, sanding, batch consistency and application technique all influence the finished appearance.

How much material will I need?

Coverage depends on the Microestil product, substrate, number of coats and application thickness. Contact Cadoro with your square footage and project details for help calculating quantities.

Project Planning and Support

• Walls & feature surfaces: choose the texture and finish system that matches the look you want.
• Floors & high-traffic areas: use the appropriate base, reinforcement and protective sealer system.
• Showers & wet areas: waterproofing and sealer selection are project-specific.
• Professional support: Cadoro can help with product selection, coverage and system planning.

Shipping is available across Canada and the United States. Need help sizing a project? Contact Cadoro before ordering.