High features’s varnish. It is a two-component aliphatic polyurethane in water base; it provides tough and flexible coatings with high resistance to burn and chemical agents.

It is a permanent anti-soiling protection for floors subjected to intense wear action. It resists penetration of oily and aqueous dirt. This product does not yellow with UV rays, so that it is a suitable product for outdoor use. The total absence of solvents allows the use of this product in areas with people, without vacating them.

Is an eco-friendly, trowel-applied, medium-grain (.07mesh) decorative wall-coating obtained from selected Carrara-marble aggregates and genuine slaked-lime CL 90-S baked in wood-fire kilns and aged for 8-10 months.
It is suitable for indoor applications and allows to obtain relief, rough or smooth surfaces according to the technique.

Is an eco-friendly, trowel-applied, medium-grain (.04mesh) decorative wall-coating obtained from selected Carrara-marble aggregates and genuine slaked-lime CL 90-S baked in wood-fire kilns and aged for 8-10 months.
It is suitable for indoor applications and allows to obtain relief, rough or smooth surfaces according to the technique.

Classic + is the smoothest of all our Italian lime based products, designed for creating a high gloss or "Venetian plaster" surface.

Intonachino fine is the ideal material for floating substrates or creating a distress concrete effect, once compressed it lends itself to a matte finish. (.07 mesh)

Travertino is the ideal material for high traffic wall areas and showcases the aggregate used as part of its grain structure. Create smooth finishes or distress texture.

Product specially designed for cleaning and maintenance of floors. Its water-based maintenance components are respectful with the environment. Cleans and protects in a single process. Provides a satin and antistatic finish.

One-component, ready-to-use paste micromorter, indicated for the creation of continuous decorative floor and wall tiles. Excellent adhesion on concrete, ceramic, marble, plaster, etc., as well as any stable surface.

Polyurethane aliphatic varnish one-component with water base. It can apply in little or non-existent ventilation areas because it does not contain dissolvent. It does not require mask for organic or chemical vapors, but yes gloves and goggles (only in airless application will be necessary to use comprehensive protection and mask).

Reduction of the absorption of water in treated. Increase resistance to atmospheric agents such as acid rain. Withstand UV radiation. High turn down water and keep open pores. Limit the growth of fungi and mold. Fight against outside carbonation efflorescence. Low sensitivity to ice/thaw. It retains the original look and vapour permeability. React with carbon dioxide (CO2) in the air to form an insoluble.

Aqueous resin, bridge connecting for cement mortars on porous and non-porous supports, such as mortar, concrete, anhydrite floors, tiles, “terrazo”, marble, stoneware... High water resistance.

Mortar based on calcium cements and aggregates selected powdered additives that give excellent properties. Excellent adhesion on any stable support, high hardness and flexibility. Suitable for the application of the smoothing coats in the Microestil® Decor system or mass dyed for Microestil Rustic system.

Decorative mortar for the design of continuous surfaces on pavements and coatings. Ecological formulation water base. Non-toxic and incombustible. Applicable indoors and outdoors. High surface resistance. Hardens without cracking. Excellent adhesion.

Decorative mortar for creating decorative continuous pavements of high resistance. Ecological formulation water base. Non-toxic and incombustible. Applicable indoors and outdoors. High surface resistance. Hardens without cracking. Excellent adhesion.

Mainly for creating decorative coatings on mineral surfaces in pools, fountains, jacuzzis and spas

Mainly for creating decorative coatings on mineral surfaces in pools, fountains, jacuzzis and spas

Mainly for creating decorative coatings on mineral surfaces in pools, fountains, jacuzzis and spas

The LMFX binder is a water base single component- product.

The metal powders are real metal powders and safety must be taken to protect yourself from the dust created during the mixing and sanding.

The LMFX binder is a water base single component- product.

The metal powders are real metal powders and safety must be taken to protect yourself from the dust created during the mixing and sanding.